One Step Closer to the Original Performance
The A&norma SR15 uses two audio DAC chips for a Dual-DAC setup. These chips are known for their use in Home Hi-Fi systems which offer greater presence compared to the inferior DAC chips designed for mobile devices. There are many devices that use DAC chips for audio processing, however there are different tiers and quality of chips sought by Hi-Fi audio manufacturers to deliver an experience close to the original performance. A&norma SR15 has adopted the MasterHIFI™ class DAC, CS43198 for the first time in a portable system. At Astell&Kern, we believe that true Hi-Fi should sound as close as possible to the original performance. The CS43198 is one of few DAC chipsets that is capable of bringing us even closer to the original when it's matched with the analog amp design of Astell&Kern. In result, it brings even more liveliness and warmth of sound without distortion. Furthermore, A&norma SR15 supports native DSD bit-to-bit, and gets one step closer to the Hi-Fi system.
Enhanced Audio Processing Power with Quad-core CPU
Some may think that only sound matters in Hi-Fi systems. While it does matter greatly, there are other factors that influence your immersive music experience as well. A&norma is designed to remove any distracting elements, including noise, distortion and unintuitive user interface. The Quad-core CPU gives you even more processing power for your digital music and a lot faster, natural UI experience. Get lost in your music without distractions.
24-bit, 192 kHz Bit-to-Bit Playback
The A&norma SR15 plays any resolution of digital files up to 24-bit/192 kHz, bit-for-bit. For 32-bit audio, downsampling is performed by the SRC (Sample Rate Converter) method. DSD is native up to 64 MHz and DSD 128 MHz is converted to PCM for playback. * 32-bit, 384 kHz is downsampled to 24-bit, 192 kHz, and 32-bit, 352 kHz is downsampled to 24-bit, 176 kHz for playback. * DSD 128 is converted via DSD-to-PCM to PCM 24-bit, 176 kHz for playback.
A simple USB connection will allow the A&norma SR15 to be used as a digital music storage device and /or pre-amp to output digital audio through USB. The A&norma SR15 transfers DSD in native format through DoP (DSD over PCM) and converts DSD to PCM for output for external USB Audio that do not support DoP. * USB audio (Digital Out) output is available only when an external device can accept digital input through USB. * DoP (DSD over PCM): This is the standard for transferring DSD data to a USB interface and sends DSD data by mounting them onto PCM data frames. * The type of OTG cable to connect the SR15 with a portable amp differs depending on the specs of the amp. An OTG cable is not included in the SR15 package.
Body Color: Dark Gray
Body Material: Aluminum
Display: 3.3inch WVGA (480 x 800) TFT LCD
Supported Audio Formats: WAV, FLAC, WMA, MP3, OGG, APE, AAC, ALAC, AIFF, DFF, DSF
Sample rate: PCM : 8kHz ~ 192kHz (8/16/24bits per Sample)
/ DSD Native : DSD64(1bit 2.8MHz), Stereo / DSD to PCM : DSD128(1bit 5.6MHz)
Output Level: Unbalance 2.0Vrms / Balance 4.0Vrms (Condition No Load)
DAC: Cirrus Logic CS43198 x2 (Dual DAC)
Decoding: Support up to 24bit / 192kHz Bit to Bit Decoding
Input: USB Micro-B input (for charging & data transfer (PC & MAC)) / Connection Mode : MTP (Media Device)
Outputs: PHONES (3.5mm) / Balanced Out (2.5mm, only 4-pole supported)
Wi-Fi: 802.11 b/g/n (2.4GHz)
Bluetooth: V4.1 (A2DP, AVRCP, aptXtm HD)
Dimensions: 2.26 ”(57.5 mm) [W] x 3.92 ”(99.7 mm) [H] x 0.63 ”(16.1 mm) [D]
Weight: about 5.43 oz (about 154 g)
Feature Enhancements: Firmware upgrades supported (OTA)
External Memory: microSD (Max 1TB) x1